If you find that the automatic latch on your EVO2 does not retract properly, don’t worry! This guide will help you troubleshoot the issue and provide steps to ensure your device operates safely and effectively.
Accessing the Mechanism
To begin, you will need to open the rear right cover of your EVO2. This will allow you to access the cord that controls the latch retraction mechanism. It’s essential to handle this part carefully to avoid any further damage.
Performing Calibration
Once you have access to the mechanism, the next step is to perform a calibration. This is crucial as it ensures that the end-of-travel positions for the hook are correctly set. Proper calibration will help the latch function smoothly and prevent any operational issues.
Ensuring Correct Operating Position
When performing the adjustment, make sure that the hook is fully open and pressed firmly against the upper stop. Additionally, the latch should be in the closed (hidden) position. This alignment is vital for the latch to function correctly and to avoid any misalignment that could cause the hook to not close properly.
Tensioning the Cord
After confirming the correct positions, you will need to tighten the cord connected to the latch mechanism. Secure the cord using the screw located in the bushing. This step is important to ensure that the latch retracts smoothly and operates as intended.
For a detailed visual guide, please refer to the instructional video linked below, which walks you through the entire process step-by-step. [video]
Spare Parts
In some cases, you may find that certain components are missing or damaged, which can affect the latch's functionality. The parts that may need replacement include:
- Latch shaft: EVO2-1010
- Latch spacer: EVO2-1011
- Latch spring: EVO2-1020
- Cord EVO2: EVO2-1028
-Latch assembly: EVO2-1500
-Latch spring limiter: EVO2-1017
-Cable Clamp: 087502
If you require any of these spare parts, please refer to the following link [here]
By following these steps, you can ensure that your EVO2 automatic latch functions correctly. If you have any further questions or need assistance, feel free to reach out to our customer support team!