This article provides a comprehensive overview of the various firmware versions for our products, detailing the enhancements and fixes introduced in each release. Understanding these updates can help you make the most of your device's capabilities.
Firmware Version B01028
Release Date: 04/08/16
This version improved span value retrieval by detecting non-numerical values and allowing a second inquiry if needed. If the value is still not meaningful, it retrieves the previously stored value. Additionally, it introduced manual tuning of the IC frequency and expanded the information menu for better user experience.
Firmware Version B01029
Release Date: 27/09/16
This update corrected the span value to accommodate values under 10,000 mV/V and enhanced the detection of radio IC devices (CC1101 or CC1200). Navigation improvements were made for the hook screen-grid, and detailed modes were activated to provide verbose weight and state readings via USB serial connection.
Firmware Version B01030
Release Date: 03/11/16
This version expanded the SLIP parameter option to the new EVO5 model, previously limited to EVO2. It also introduced detection for unfinished open/close operations, which is particularly useful for new hook controllers with digital encoders.
Firmware Version B01031
Release Date: 18/11/16
The EVO20 model now incorporates the same load cell as the EVO25, ensuring consistent firmware configuration. Users can disable keyboard locking to keep a selection of hooks permanently active.
Firmware Version B01032
Release Date: 04/01/17
A new menu for configuring the hysteresis parameter was added for EVO2 and EVO5 models. This version also enabled direct serial output through an RS232 port and improved event logging to prevent memory corruption.
Firmware Version B01033
Release Date: 25/01/17
The AUTOCLOSE menu was modified to allow values of 0, 1, and 2, enhancing user control over the timing of automatic closure. Weight indication was corrected for better visibility after open/close operations.
Firmware Version B02034
Release Date: 03/02/17
This update introduced software support for the ARIB interface and corrected navigation issues in the main menu at the user level. It also fixed movement errors during opening and closing operations.
Firmware Version B02035
Release Date: 13/02/17
Display improvements were made, including enlarging the main menu and adding new entries. A general modification option for the autoclose parameter was also introduced.
Firmware Version B02036
Release Date: 24/02/17
This version improved the locking mechanism in the main menu and allowed resolution values to vary based on the model. It also clarified weight measurement indications.
Firmware Version B02037
Release Date: 01/03/17
New functionality was introduced to execute external commands via USB or RS232 channels, enhancing device versatility.
Firmware Version B02038
Release Date: 23/03/17
This update corrected USB library errors, ensuring smoother communication and functionality.
Firmware Version B02039
Release Date: 05/05/17
A new menu option was added to set the closing angle, allowing for more precise control during operations. The autoclose functionality was also extended.
Firmware Version B02040
Release Date: 09/05/17
This version updated the four hooks grid for easier selection and introduced experimental configurations for different baud rates.
Firmware Version B02041
Release Date: 16/05/17
The grid selection was further refined, allowing factory zero settings only in Factory level.
Firmware Version B02042
Release Date: 05/06/17
Improvements were made in data memory access and command responses, enhancing overall performance.
Firmware Version B02043
Release Date: 15/06/17
The hook menu was reorganized into Motor, Power, and Radio categories, improving user navigation.
Firmware Version B02044
Release Date: 26/06/17
This update added the option to disable open/close functionality buttons, providing users with more control.
Firmware Version B02045
Release Date: 25/07/17
Adaptations were made for communication through a repeater, allowing for multiple hook connections.
Firmware Version B02046
Release Date: 31/08/17
Hook movement animation was deactivated by default, with a new option to enable it if desired.
Firmware Version B02047
Release Date: 24/10/17
This version corrected display issues related to weight refresh and introduced a new battery level threshold for motor operation.
Firmware Version B02048
Release Date: 12/12/17
A new serial number scheme for hooks was implemented for better tracking.
Firmware Version B02049
Release Date: 08/03/18
This update adapted the firmware for new flash memory and included cycle reading capabilities.
Firmware Version B02050
Release Date: 12/04/18
Improvements were made for reading maintenance dates and correcting flash memory access issues.
Firmware Version B02051
Release Date: 05/07/18
This version updated maintenance date functionalities.
Firmware Version B02052
Release Date: 20/07/18
Total cycles and overload readings were updated, along with new event recording options.
Firmware Version B02053
Release Date: 02/08/18
New testing options for carrier and modulated signals were added to the frequency change menu.
Firmware Version B02054
Release Date: 10/10/18
Temperature measurement capabilities were introduced, along with configurable auto-lock times.
Firmware Version B02055
Release Date: 10/11/18
This version was deprecated in favor of subsequent updates.
Firmware Version B02056
Release Date: 16/11/18
Menu changes for serial channel configuration and event logging were implemented.
Firmware Version B02057
Release Date: 28/11/18
Frequency menus and temperature displays were improved.
Firmware Version B02058
Release Date: 20/12/18
Battery low threshold controls were modified for better accuracy.
Firmware Version B02059
Release Date: 25/01/19
New options for retrieving stored span values were introduced.
Firmware Version B02060
Release Date: 11/02/19
Corrections were made to display values for Korea frequencies and battery indications.
Firmware Version B02061
Release Date: 20/02/19
Audible alerts were added for weight warnings.
Firmware Version K02062
Release Date: 28/05/19
New frequencies were added for Korea testing purposes.
Firmware Version B02062
Release Date: 28/05/19
Minor changes were made to the frequency menu.
Firmware Version K02063
Release Date: 15/10/19
LBT management was modified for Korea certification compliance.
Firmware Version K02064
Release Date: 21/10/19
Default LBT threshold values were modified.
Firmware Version B02063
Release Date: 21/01/2020
This version allowed recording reports to μSD cards and enabled product selection from a user-uploaded list.
Firmware Version B02064 - Air France
Release Date: 21/01/2020
An audible alarm was activated for weight warnings, with updates to weight reading codes.
Firmware Version B02065
Release Date: 11/02/2020
Adaptations were made for the new display model, requiring a compatible bootloader.
Firmware Version B02066
Release Date: 26/01/2021
The NEO60 model was added.
Firmware Version B02067
Release Date: 26/01/2021
The NEO60 model was added with new display configurations.
Firmware Version B02068
Release Date: 02/09/2021
Audible alarms were enabled for all hooks, improving functionality.
Firmware Version B02069
Release Date: 02/09/2021
Similar updates as B02068 were made for the new display model.
Firmware Version B02070
Release Date: 26/10/2021
New models were added, and alarm testing parameters were introduced.
Firmware Version B02071
Release Date: 26/10/2021
Similar updates as B02070 were made for the new display model.
Firmware Version B02072
Release Date: 31/03/2022
Display issues for weight readings were fixed, and modifications were made for compatibility with different load cells.
Firmware Version B02073
Release Date: 31/03/2022
Similar updates as B02072 were made for the new display model.
Firmware Version B02074
Release Date: 23/11/2023
Added the ability to modify total cycles and revision numbers for hooks without serial numbers.
Firmware Version B02075
Release Date: 23/11/2023
Similar updates as B02074 were made for the new display model.
Firmware Version B02076
Release Date: 08/01/2024
Contrast adjustments were made for better outdoor visibility.
Firmware Version B02077
Release Date: 08/01/2024
Similar updates as B020